Users Guide

Using Microsoft
®
Active Directory
®
119
Configuring Active Directory Using CLI on Systems Running Server Administrator
You can use the omconfig preferences dirservice command to configure the Active Directory service.
The productoem.ini file is modified to reflect these changes. If the adproductname is not present in the
productoem.ini file, a default name will be assigned. The default value will be system
name-software-product name, where system name is the name of the system running Server Administrator,
and software-product name refers to the name of the software product defined in omprv32.ini (that is,
computerName-omsa).
NOTE: This command is applicable only on systems running the Windows operating system.
NOTE: Restart the Server Administrator service after you have configured Active Directory.
Table 8-16 shows the valid parameters for the command.
Table 8-16. Active Directory Service Configuration Parameters
name=value pair Description
prodname=<text> Specifies the software product to
which you want to apply the
Active Directory configuration
changes. Prodname refers to the
name of the product defined in
omprv32.ini. For Server
Administrator, it is omsa.
enable=<true | false> true: Enables Active Directory
service authentication support.
false: Disables Active Directory
service authentication support
adprodname=<text> Specifies the name of the product
as defined in the Active Directory
service. This name links the
product with the Active Directory
privilege data for user
authentication.