Connectivity Guide

Settings are the conditions of a manageable object that determine what happens when a certain value is detected in a
component. For example, a user can set the upper critical threshold of a temperature probe to 75 degrees Celsius. If the probe
reaches that temperature, the setting causes an alert to be sent to the management console. Some settings, when reached, can
trigger a system shutdown or other response to prevent damage to the system.
State refers to the condition of an object that has more than one condition. For example, an object may be in a not ready or in
an enabled state.
Status refers to the health of an object or how the object is functioning. For example, the status of a temperature probe that is
measuring acceptable temperatures would be reported as normal. When the probe begins reading temperatures that exceed
limits set by the user, it reports a critical status.
Tables
This reference guide contains two types of tables: tables that are used to organize and define variable values and tables that
define MIB objects. Readers must understand the difference between these two types of tables.
SNMP Tables
Most of the MIB objects defined in this reference guide are organized into SNMP tables. SNMP tables organize data into two-
dimensional structural arrays. In SNMP, objects that have a relationship to other objects are called columnar objects. Columnar
objects are objects used to form lists and tables. When a MIB group is divided into one or more discrete tables, the word table
has a technical meaning. An example is the section of this reference guide entitled Universal Unique Identifier (UUID). The UUID
object has a type and a value that uniquely identifies an object such as a chassis. The table defines all of the variables that
comprise the managed object UUID.
The following table is an example of an SNMP table. The table contains variables that must occur in a definite sequence. In the
example table the defined variables are UUID Chassis Index, UUID Index, UUID Type, and UUID Value.
These objects comprise the Server Administrator definitions for the UUID.
Table 7. UUID Table
Name
uUIDTable
Object ID 1.3.6.1.4.1.674.10892.1.300.20
Description Defines the UUID table.
Syntax SEQUENCE OF UUIDTableEntry
Access Not accessible
Table 8. UUID Table Entry
Name
uUIDTableEntry
Object ID 1.3.6.1.4.1.674.10892.1.300.20.1
Description Defines the UUID table entry.
Syntax UUIDTableEntry
Access Not accessible
Index
uUIDIndex
,
uUIDchassisIndex
Table 9. UUID Chassis Index
Name
uUIDchassisIndex
Object ID 1.3.6.1.4.1.674.10892.1.300.20.1.1
Introduction 11