Manualshelf

CLI Guide

ManualsBrandsDell ManualsActive System ManagerOpenManage Server Administrator Version 9.5
61626364656667686970
Table 46. BIOS Setup Settings on systems prior to PowerEdge YX2X systems (continued)
name=value pair 1 attribute= name=value pair 2 setting= Description
attribute=nic2 setting=enabled | enabledwithpxe |
disabled | enabledonly | enablednonepxe
| enabledwithiscsi
● enabled: Enables the second NIC
during system boot.
● enabledwithpxe: Enables the second
NIC during system boot (with PXE on
if the system has PXE).
● disabled: Disables the second NIC
during system boot.
● enabledonly: Enables the second
NIC during system boot (with PXE
off if the system has PXE).
● enablednonepxe: Enables the
second NIC during system boot (with
PXE off if the system has PXE).
● enabledwithiscsi: Enables the
second NIC during system boot (with
iSCSI on if the system has iSCSI).
attribute=nic3 setting=enabled | enabledwithpxe |
disabled | enabledonly | enablednonepxe
| enabledwithiscsi
● enabled: Enables the third NIC
during system boot.
● enabledwithpxe: Enables the third
NIC during system boot (with PXE on
if the system has PXE).
● disabled: Disables the third NIC
during system boot.
● enabledonly: Enables the third NIC
during system boot (with PXE off if
the system has PXE).
● enablednonepxe: Enables the third
NIC during system boot (with PXE
off if the system has PXE).
● enabledwithiscsi: Enables the third
NIC during system boot (with iSCSI
on if the system has iSCSI).
attribute=nic4 setting=enabled | enabledwithpxe |
disabled | enabledonly | enablednonepxe
| enabledwithiscsi
● enabled: Enables the fourth NIC
during system boot.
● enabledwithpxe: Enables the fourth
NIC during system boot (with PXE on
if the system has PXE).
● disabled: Disables the fourth NIC
during system boot.
● enabledonly: Enables the fourth NIC
during system boot (with PXE off if
the system has PXE).
● enablednonepxe: Enables the fourth
NIC during system boot (with PXE
off if the system has PXE).
● enabledwithiscsi: Enables the
fourth NIC during system boot (with
iSCSI on if the system has iSCSI).
attribute=numlock setting=on | off
● on: Uses the keypad as number keys.
● off: Uses the keypad as arrow keys.
attribute=NodeInterleave
setting=enabled | disabled
● enabled: Enables Node Interleaving
and disables Non-Uniform Memory
Access.
Omconfig Managing Components Using The Instrumentation Service 65