CLI Guide

The output that is displayed is as follows:
Event Message Format : enhanced
Omreport preferences logging
Use the omreport preferences logging command to view the log details.
The following table lists the available attributes of omreport preferences logging.
Table 39. Valid Parameters Of Omreport Preferences Logging
name=value pair Description
attribute=oslogfilter Displays the settings configured for OS logging filter.
attribute=archiveesmlog Displays the settings for Auto Archive ESM Log preference.
attribute=logallsensors Displays the settings configured for Log All ESM Sensor events preference.
Type:
omreport preferences logging attribute=oslogfilter
The output that is displayed is as follows:
Log Critical : false
Log Warning : true
Log Informational : true
Omreport preferences webserver
Use the omreport preferences webserver command to view the URL details, current key-sign algorithm, and the JRE
details.
The following table lists the available attributes of omreport preferences webserver.
Table 40. Valid Parameters Of Omreport Preferences Webserver
name=value pair Description
attribute=geturl Reports the URL information of the web server. This command helps to
access the Server Administrator GUI using a remote web server
(management system).
attribute=getsignalgorithm Reports the current key-sign algorithm.
attribute=getjre Displays the version of the currently used JRE.
attribute=getjrelist Displays the supported JRE versions installed in the system.
attribute=getciphers Displays the current cipher values configured.
attribute=getsslprotocol Displays the current SSL Protocol values set.
attribute=getport Displays the information of the configured port value.
attribute=getipaddress Reports the configured IP Address value.
attribute=getsessiontimeout Displays the configured session time-out value.
Type:
omreport preferences webserver attribute=getjrelist
54
omreport Viewing System Status Using The Instrumentation Service