CLI Guide

Memory
● Total Installed Capacity
● Memory Available to the Operating System
● Total Maximum Capacity
● Memory Array Count
Memory Array
The following details are listed for each memory board or module in the system (for example, the system
board or the memory module in a given slot number):
● Location
● Use
● Installed Capacity
● Maximum Capacity
● Slots Available
● Slots Used
● ECC Type
BIOS
● Manufacturer
● BIOS Version
● Release Date
Firmware
● Name
● Version
Network Data
The following details are listed for each NIC and Team interface, if Team interface is configured in the system:
● IP Address
● Subnet Mask
● Default Gateway
● MAC Address
Storage Enclosures
The following details are listed for each storage enclosure attached to the system:
● Name
● Service Tag
Omreport System Thrmshutdown Or Omreport Servermodule
Thrmshutdown
Use the omreport system thrmshutdown or omreport servermodule thrmshutdown command to view the
properties configured for a thermal shutdown action.
The three properties that display for thermal shutdown are disabled, warning, or failure. If the CLI displays the following
message, the thermal shutdown feature has been disabled:
Thermal protect shutdown severity: disabled
If the system is configured to shutdown when a temperature probe detects a warning or failure event, one of the following
messages is displayed:
Thermal protect shutdown severity: warning
Thermal protect shutdown severity: failure
52
omreport Viewing System Status Using The Instrumentation Service