CLI Guide

Table 220. Omconfig Delete Cachecade (continued)
display the controller IDs and then type omreport storage cachecade controller=ID
to display the IDs for the cachecades of the controller.
In some circumstances, you may receive a warning message. You can override this warning by
using the force=yes parameter. In this case, the syntax is as follows:
omconfig storage cachecade action=deletecachecade controller=id
cachecade=id force=yes
Example to Delete cachecade 4 on controller 1.
Example
omconfig storage cachecade action=deletecachecade controller=1
cachecade=4
Omconfig Resize Cachecade
Table 221. Omconfig Resize Cachecade
Description Resizes a cachecade by adding or removing physical disks.
Syntax
omconfig storage cachecade action=resize controller=id cachecade=id
pdisk=<PDISKID>, where id is the controller ID and the cachecade ID as reported by the
omreport command. To obtain these values, type omreport storage controller to
display the controller IDs and then type omreport storage cachecade controller=ID
to display the IDs for the cachecades of the controller.
Example to Resize cachecade 4, use physical disks 0 through 3 on connector 0 of controller 1.
Example for SAS
controllers
omconfig storage cachecade action=resize controller=1 cachecade=4
pdisk= 0:2:0,0:2:1,0:2:2,0:2:3
Example for SCSI,
SATA, and ATA
controllers
omconfig storage cachecade action=resize controller=1 cachecade=4
pdisk=0:0,0:1,0:2,0:3
Omconfig Rename Cachecade
Table 222. Omconfig Rename Cachecade
Description Renames a cachecade.
Syntax
omconfig storage cachecade action=rename controller=id cachecade=id
name=<string>, where id is the controller ID and the cachecade ID as reported by the
omreport command. To obtain these values, type omreport storage controller to
display the controller IDs and then type omreport storage cachecade controller=ID
to display the IDs for the cachecades of the controller.
Example to Rename cachecade 4 on controller 1 to cc4.
Example
omconfig storage cachecade action=rename controller=1 cachecade=4
name=cc4
Omconfig NVMe adapter configuration commands
The following table displays the omconfig command syntax required to configure NVMe device properties.
186
Omconfig storage commands