CLI Guide
Table 7. Command Level 1, Level 2, And Level 3 For omreport (continued)
Command Level 1 CommandLevel 2 Command Level 3 User Privilege
Required
Use
settings, such as the
Power button and/or
Nonmasking
Interrupt (NMI)
button (if present on
the system), are
enabled or disabled. It
also displays the front
panel encryption access
information and the
front panel LCD
information.
fru U, P, A Displays the Field
Replaceable Unit (FRU)
information.
hwperformance U, P, A Displays the status and
cause for the system’s
performance
degradation.
info U, P, A Displays a status
summary for main
system chassis
components.
intrusion U, P, A Displays the status of
the system’s intrusion
sensor(s).
leds U, P, A Displays the properties
you have set for light-
emitting diodes to flash
under various alert
conditions.
memory U, P, A Displays properties of
the system's memory
arrays.
nics U, P, A Displays the NIC and
Team interface
properties.
ports U, P, A Displays the properties
for the system’s parallel
and serial ports, such
as I/O address, IRQ
level, connector type,
and maximum speed.
processors U, P, A Displays properties of
the system’s
processors, including
speed, manufacturer,
and processor family.
pwrmanagement U, P, A Displays power
inventory details such
as system idle power,
system maximum
potential power, and
18 omreport Viewing System Status Using The Instrumentation Service