CLI Guide

Omconfig Rescan Controller
Table 152. Omconfig Rescan Controller
Description Rescans a controller. For more information, see the Dell EMC OpenManage Online Help .
Syntax omconfig storage controller action=rescan controller=id, where id is the
controller ID as reported by the omreport storage controller command.
Example to Rescan controller 1.
Example
omconfig storage controller action=rescan controller=1
NOTE: The rescan controller is not supported on non-RAID SCSI and SAS controllers. Reboot
the system to make the configuration changes visible on non-RAID SCSI controllers.
Omconfig Enable Controller Alarm
Table 153. Omconfig Enable Controller Alarm
Description Enables the controller alarm. For more information, see the Dell EMC OpenManage Online Help .
Syntax omconfig storage controller action=enablealarm controller=id, where id is
the controller ID as reported by the omreport storage controller command.
Example to Enable the alarm on controller 1.
Example
omconfig storage controller action=enablealarm controller=1
Omconfig Disable Controller Alarm
Table 154. Omconfig Disable Controller Alarm
Description Disables the controller alarm. For more information, see the Dell EMC OpenManage Online Help .
Syntax omconfig storage controller action=enablealarm controller=id, where id is
the controller ID as reported by the omreport storage controller command.
Example to Disable the alarm on controller 1.
Example
omconfig storage controller action=disablealarm controller=1
Omconfig Quiet Controller Alarm
Table 155. omconfig Quiet Controller Alarm
Description Silences an activated controller alarm. For more information, see the Dell EMC OpenManage
Online Help.
Syntax omconfig storage controller action=quietalarm controller=id, where id is
the controller ID as reported by the omreport storage controller command.
Example to Quiet the alarm on controller 1.
Example
omconfig storage controller action=quietalarm controller=1
162 Omconfig storage commands