CLI Guide

Table 141. omconfig cancel initialize virtual disk (continued)
Syntax omconfig storage vdisk action=cancelinitialize controller=id vdisk=id,
where id is the controller ID and virtual disk ID as reported by the omreport command.
NOTE: To obtain these values, type omreport storage controller to display the
controller IDs and then type omreport storage vdisk controller=ID to display the
IDs for the virtual disks attached to the controller.
Example to Cancels the initialization of virtual disk 4 on controller 1.
Example
omconfig storage vdisk action=cancelinitialize controller=id vdisk=id
Omconfig cancel background initialize
Table 142. omconfig cancel background initialize
Description Cancels the background initialization process on a virtual disk.
Syntax
omconfig storage vdisk action=cancelbginitialize controller=id
vdisk=id, where id is the controller ID and virtual disk ID as reported by the omreport
command.
NOTE: To obtain these values, type omreport storage controller to display the
controller IDs and then type omreport storage vdisk controller=ID to display the
IDs for the virtual disks attached to the controller.
Example to Cancel background initialization on virtual disk 4 on controller 1.
Example
omconfig storage vdisk action=cancelbginitialize controller=1 vdisk=4
Omconfig Assign Dedicated Hot Spare
Table 143. omconfig Assign Dedicated Hot Spare
Description Assigns one or more physical disks to a virtual disk as a dedicated hot spare.
Syntax
omconfig storage vdisk action=assigndedicatedhotspare controller=id
vdisk=id pdisk=<PDISKID> assign=yes, where id is the controller ID and virtual disk ID
as reported by the omreport command. The <PDISK>variable specifies the physical disk.
NOTE: To obtain these values, type omreport storage controller to display the
controller IDs and then type omreport storage vdisk controller=ID to display the
IDs for the virtual disks and physical disks attached to the controller.
Example to Assign physical disk 3 on connector 0 of controller 1 as a dedicated hot spare to virtual disk 4. On
a Serial Attached SCSI (SAS) controller, the physical disk resides in enclosure 2.
Example for SCSI,
SATA, and ATA
controllers
omconfig storage vdisk action=assigndedicatedhotspare controller=1
vdisk=4 pdisk=0:3 assign=yes
Example for SAS
controllers
omconfig storage vdisk action=assigndedicatedhotspare controller=1
vdisk=4 pdisk=0:2:3 assign=yes
156 Omconfig storage commands