CLI Guide

Omreport NVMe adapter
The following table describes the syntax for the omreport nvmeadapter commands.
Table 107. omreport NVMe adapter command
Required Command Levels (1, 2, 3)
And name=value pair
Optional name=value pairs
Use
omreport storage nvmeadapter
Displays the properties of the NVMe
adapters.
controller=id, where id is the controller
number. For example, controller=0.
Displays the properties of all the NVMe
adapters on the specified controller.
controller=id, nvmeid=id, where id is the
controller number and the NVMe adapter
respectively. For example, controller=0
nvmeid=1.
Displays the properties of the specified
NVMe adapter on the specified
controller.
Omreport storage commands 139