Dell EMC OpenManage Version Port Information Guide Version 9.5 September 2020 Rev.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2020 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents Chapter 1: Introduction................................................................................................................. 4 Accessing documents from the Dell EMC support site..............................................................................................4 Other Documents You May Need....................................................................................................................................5 Contacting Dell EMC.....................................
1 Introduction The Dell EMC OpenManage Port Information document helps system administrators and technicians to identify the ports usage in Dell EMC OpenManage systems management software, standard operating system services, and other agent applications. NOTE: This document includes sections or data that is not applicable to the PowerEdge MX740x and PowerEdge MX840c.
Other Documents You May Need In addition to this guide, you can access the following guides available at www.dell.com/Support/Home. ● The Dell EMC Systems Software Support Matrix provides information about the various Dell systems, the operating systems supported by these systems, and the Dell EMC OpenManage components that can be installed on these systems. ● The Dell EMC OpenManage Server Administrator Installation Guide contains instructions to help you install Dell EMC OpenManage Server Administrator.
Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell EMC for sales, technical support, or customer service issues: 1. Go to Dell.com/support. 2. Select your support category. 3. Verify your country or region in the Choose a Country/Region drop-down list at the bottom of the page. 4. Select the appropriate service or support link based on your need.
2 Ports The following tables list the ports used by the OpenManage systems management software, standard operating system services and other agent applications. NOTE: Ports with the correct configuration are necessary to allow OpenManage systems management software to connect to a remote device through firewalls. NOTE: The systems management software version mentioned indicates the minimum version of the product required to use that port. NOTE: CIM ports are dynamic.
OpenManage Essentials Management Stations Table 1. Supported Protocols and Ports on Management Stations Port Numbe r Protocol Port Type Maximum Encryption Level Direction Usage 25 SMTP TCP None In/Out Optional email alert action 162 SNMP UDP None In Event reception through SNMP 1433 Proprietary TCP None In/Out Optional remote SQL server access 2607 HTTPS TCP 128-bit SSL In/Out Web GUI 1278 HTTP TCP None In/Out To launch OME console over HTTP Managed Nodes Table 2.
Table 2.
Table 3. Supported Protocols and Ports (continued) Port Number Protocols Port Type Maximum Direction Encryption Level Usage Configurable 636 LDAP TCP SSL Out LDAPS, Active Directory client Yes 3269 LDAP TCP None Out Active Directory client No 8081 HTTP TCP None Out Link and Launch to FN-IOA, MXL-IOA No * — When a DHCP client connects to a DHCP server, the source port is 68 and the destination port is 67.
Table 4. Supported Protocols and Ports on Virtual Appliance (continued) Port Number Protocols Port Type Maximum Encryption Level Direction Destination Usage Description 162 SNMP Agent UDP None In iDRAC/ESXi to OMIVV appliance SNMP Agent (server) To receive SNMP traps from managed nodes. 443 HTTPS TCP 128-bit In OMIVV UI to OMIVV appliance HTTPS server Web services offered by OMIVV. These Web services are consumed by vCenter Web Client and Dell Admin portal.
Table 4. Supported Protocols and Ports on Virtual Appliance (continued) Port Number Protocols Port Type Maximum Encryption Level Direction Destination Usage Description and mountd services by the V2 and V3 protocols of the NFS server. 11620 SNMP Agent UDP None In iDRAC to OMIVV appliance SNMP Agent (server) Port used to receive the standard SNMP alerts by using UDP: 162. Data from iDRAC, OMSA, and CMC or Management Module are received to manage and monitor the managed nodes.
Table 5. Supported Protocols and Ports on Managed Nodes (continued) Port Number Protocols Port Type Maximum Encryption Level Direction Destination Usage Description station. This port has to open from ESXi. 8080 HTTP TCP 128-bit Out ESXi to OMIVV appliance HTTP server; downloads the OMSA VIB and fixes noncompliant vSphere hosts. Helps ESXi to download the OMSA/driver VIB. Managed Nodes (iDRAC or CMC or Management Module) Table 6.
Table 6. Supported Protocols and Ports on Managed Nodes (continued) Port Number Protocols Port Type Maximum Encryption Level Direction Destination Usage Description and firmware update. To access the iDRAC configuration s from the OMIVV used in deployment flow. 4001 to 4004 NFS UDP None In/Out iDRAC to/from OMIVV Public Share For iDRAC to access NFS public share that is exposed by OMIVV appliance. This is used for operating system deployment and firmware update.
Table 7. Supported Protocols and Ports (continued) Port Number Protocols Port Type Direction Usage Configurable software update feature (for Windows operating systems). 161 SNMP UDP In/Out SNMP query management No 162 SNMP UDP Out SNMP trap event No 443 HTTPS TCP In/Out Remote Management using Web Server to connect to OpenWSMAN/WinRM) Yes 1311 HTTPS TCP In/Out Server Administrator Web GUI Yes Random Port Number Proprietary TCP In/Out On localhost/127.0.0.1 only.
Table 9. Supported Protocols and Ports (continued) Port Number Protocols Port Type Version Maximum Encryption Level Direction Usage Configurable 162 SNMP UDP 8.1 None Out SNMP trap event No 1024-65535 (Dynamically assigned) DCOM TCP/UDP 7.x, 8.x None In/Out Monitoring and configuration through WMI N/A OpenManage Baseboard Management Utility Table 10.
Table 11. Supported Protocols and Ports (continued) Port Number Protoco Port l Type Versio n Maximum Encryption Level Directio Usage n Configurable 53, 80, 135, 137, 139, 150, 1433, 2500 N/A TCP N/A N/A N/A Symantec Console—Console using a N/A remote computer 80 HTTP TCP 1.x – 2.0.
Table 11. Supported Protocols and Ports (continued) Port Number Protoco Port l Type Versio n Maximum Encryption Level Directio Usage n Configurable 4952 N/A TCP N/A N/A N/A Deployment Solutions communication that is used for managing the connection drops. N/A 6389 Propriet ary TCP 1.x – 2.0.
Managed Node Table 13. Supported Protocols and Ports on Managed Nodes Port Number Protocol Port Type Maximum Encryption Level Direction Usage 22 SSH TCP 256–bit AES In/Out Non-Dell chassis communication 161 SNMP Agent UDP 56-bit DES In/Out SNMP query management 443 WSMan TCP 256-bit AES In/Out Chassis communication 623 RMCP/RMCP+ UDP 128-bit AES In/Out IPMI access over LAN Dell Lifecycle Controller Integration for System Center Configuration Manager Table 14.
Dell Lifecycle Controller Integration for System Center Virtualization Machine Manager Table 16.
Dell EMC OpenManage Integration for Microsoft System Center for Operations Manager Table 19.
Table 22. Managed Node (continued) Port Number Protocols Port Type Maximum Encryption Level Direction Usage Configurable 162 SNMP UDP None Out Hardware SNMP Events No 2463 SymbolSDK TCP None In PowerVault MD Array Communication No 1311 HTTP/ HTTPS TCP None In/Out OMSA Web Console No 8543 HTTP TCP None Out DCLM Communication No 8544 HTTP TCP None Out DCLM Web Server Console Launch No OpenManage Connection for IBM Tivoli Network Manager Table 23.
Dell EMC OpenManage Connection for IBM Tivoli Netcool/OMNIbus Table 25. Management Station Port Number Protocols Port Type Maximum Encryption Level Direction Usage Configurable 162 SNMP UDP In Event reception through SNMP No None Table 26.
Dell EMC iDRAC Service Module Table 29. Supported Protocols and Ports Port Number Protocols Port Type 1266 WSMan, GUI, TCP Redfish, and remote RACADM over HTTPS Direction Usage Configurable In/Out iDRAC Service Module’s feature, iDRAC access through Host OS, uses the default port 1266 on Microsoft Windows and Linux operating systems to provide access to iDRAC interfaces (WSMan, GUI, Redfish, and remote RACADM) using https:// hostname:1266 as the base URL. Yes iDRAC7 and iDRAC8 Table 30.
iDRAC6 for Rack and Tower Servers Table 32. Supported Protocols and Ports Port Number Protocols Configurable 22 SSH Yes 23 Telnet Yes 25 SMTP No 53 DNS No 68 DHCP-assigned IP address No 69 TFTP No 80 HTTP Yes 161 SNMP Agent No 162 SNMP Trap No 443 HTTPS Yes 623 RMCP/RMCP+ No 636 LDAPS No 5900 Virtual Console/Virtual Media Yes 3269 LDAPS for global catalog (GC) No iDRAC for Blade Servers Table 33.
Table 33. Supported Protocols and Ports (continued) Port Number Protocols Port Type Version Maximum Encryption Level Direction Usage Configura ble 443 HTTPS TCP 1.0 128-bit SSL In/Out Web management GUI Yes 623 RMCP/RMCP UDP + 1.0 128-bit SSL In/Out IPMI over LAN No 636 LDAPS TCP 1.0 128-bit SSL In/Out Optional ADS authentication No 3269 LDAPS for global catalog (GC) TCP 1.0 128-bit SSL In/Out Optional ADS authentication No 3668, 3669 Virtual Media Service TCP 1.
Table 34. Supported Protocols and Ports (continued) Port Number Protocols Port Type Version Maximum Encryption Level Direction Usage Configurable through Trivial FTP 80 HTTP TCP 1.0 None In/Out Redirected to HTTPS Yes 162 SNMP trap UDP 1.0 None Out SNMP trap event No 443 HTTPS TCP 1.0 128-bit SSL In/Out Web management CLI Yes 623 RMCP/RMCP UDP + 1.0 128-bit SSL In/Out IPMI over LAN No 636 LDAPS TCP 1.
Digital KVM Table 36. Supported Protocols and Ports Port Number Protocols Port Type Version Maximum Encryption Level Direction Usage Configurable 2068 Proprietary TCP 1.0 128-bit SSL In/Out Video No redirection — keyboard/ mouse 3668 Proprietary TCP 1.0 None In/Out Virtual Media No 8192 Proprietary TCP 1.0 None In/Out Video redirection to client viewer No DRAC 5 Table 37.
Table 37. Supported Protocols and Ports (continued) Port Number Protocols Port Type Version Maximum Encryption Level Direction Usage Configurable GUI and remote racadm CLI utility 623 RMCP/RMCP UDP + 1.0 128-bit SSL In/Out IPMI over LAN No 636 LDAPS TCP 1.0 128-bit SSL In/Out Optional ADS No authentication 3269 LDAPS for global catalog (GC) TCP 1.0 128-bit SSL In/Out Optional ADS No authentication 3668 Proprietary TCP 1.
Table 38. Supported Protocols and Ports (continued) Port Number Protocols Port Type Version Maximum Encryption Level Direction Usage Configurable 68 DHCP UDP 1.0 None In/Out DHCP assigned IP address No 69 TFTP UDP 1.0 None In/Out Firmware update through Trivial FTP No 80 HTTP TCP 1.0 None In/Out Web GUI redirected to HTTPS Yes 161 SNMP Agent UDP 1.0 None In/Out SNMP query management No 162 SNMP UDP 1.0 None Out SNMP trap event No 443 HTTPS TCP 1.
