Users Guide

• RAID Controller Batteries
• Firmware Or Driver Versions
• Connectors
NOTE: If you have connected the enclosure in Redundant path mode, the connectors are represented as Logical
Connector.
• Virtual Disks
Controllers Properties And Tasks
Use the controllers properties and tasks window to view information about the controller and perform controller tasks.
NOTE: The firmware and drivers listed in the Server Administrator Release Notes , see the minimum supported version
for these controllers. Later versions of the firmware and drivers are also supported. For the most recent driver and
firmware requirements, contact your service provider. The controller properties can vary depending on the model of the
controller.
Table 11. Controller Properties
Property Definition
ID Displays the ID assigned to the controller by Storage Management.
Storage Management numbers the controllers attached to the
system starting with zero. This number is the same as the
controller ID number reported by the omreport CLI Command.
For information on Command Line Interface, see the Server
Administrator Command Line Interface User’s Guide.
Status These icons represent the severity or health of the storage
component.
For more information, see Storage Component Severity.
•
— Normal/OK
•
— Warning/Non-critical
• — Critical/Failure/Error
Name Displays the name of the controller.
NOTE: For PowerEdge FD332 storage sled, the name is
displayed as:
• Single controller — PERC FD33xS (Integrated RAID
Controller <X> in Front Chassis Slot <Y>, where X
displays the controller number and Y displays the
front chassis slot number.
• Dual controller — PERC FD33xD (Integrated RAID
Controller <X> in Front Chassis Slot <Y>, where X
displays the controller number and Y displays the
front chassis slot number.
NOTE: For PowerEdge MX740c and MX840c having
PERC H745P mapped with MX5016s, the storage
controller name is displayed as PERC H745P MX
(MEZZANINE 1C)
Slot ID Displays the slot to which the controller is attached. For
PowerEdge FD332 storage sled, the name is displayed as: H745P
MX and HBA 330 MMZ (MEZZANINE 1C).
NOTE: You can also identify the slot ID by selecting the
System > Main > System Chassis > Slots object and
clicking the Information tab.
Controllers 49