Users Guide

Controller Tasks Supported On The PERC Software RAID
Controllers
Table 46. Controller Tasks Supported On The PERC S100, PERC S110, PERC S130, PERC S300, PERC S140 and PERC S150
Controllers
Controller
Task Name
PERC S100 PERC S110 PERC S130 PERC S300 PERC S140 PERC S150
Create
Virtual Disk
Yes Yes Yes Yes Yes Yes
NOTE: For physical disks connected to Software RAID S130 controller, 512 MB of disk space is by default used by the
controller for metadata.
Physical Disk Tasks Supported By The PERC Software
RAID Controllers
Table 47. Physical Disk Tasks Supported by the PERC S100, PERC S110, PERC S130, PERC S300, S140 and PERC S150
Controllers
Physical Disk
Task Name
PERC S100 PERC S110 PERC S130 PERC S300 PERC S140 PERC S150
Blink/Unblink No Yes Yes No Yes Yes
Assign and
Unassign
Global Hot
Spare
Yes Yes Yes Yes Yes Yes
Set Disk
Cache Policy
No No Yes No Yes Yes
Export Log No No Yes No Yes Yes
Convert to
RAID capable
disk
No No Yes No Yes No
Prepare to
Remove
No No Yes No Yes Yes
NOTE: For physical disks connected to Software RAID S130 controller, 512 MB of disk space is by default used by the
controller for metadata.
NOTE: When you perform the Prepare to Remove operation on the physical disk, the associated virtual disk will be in
failed state.
NOTE: The operation failed to complete message is displayed, if you perform the Prepare to Remove operation
on the physical disk of Boot virtual disk/mounted virtual disk.
Supported Features 165