Connectivity Guide

Physical Memory Tables
The following management information base (MIB) tables define the objects in the Memory Group:
• Physical Memory Array Table
• Physical Memory Array Mapped Table
• Physical Memory Configuration Table
• Physical Memory Logging Table
• Redundant Memory Unit Table
• Physical Memory Card Table
Physical Memory Array Table
The physical memory array is the entire physical memory of a system. The example that follows shows variable values for a system that
has one 128-megabyte (MB) dual in-line memory module (DIMM):
• physicalMemoryArrayMaximumSize = 2,097,152 kilobytes (KB) or 2 gigabytes (GB)
• physicalMemoryArrayTotalNumberSockets = 4 (the example system has four DIMM slots on the motherboard)
• physicalMemoryArrayInUseNumberSockets = 1 (there is only one DIMM installed)
The Rank of the DIMM are :
• 0 — Unknown
• 1 — Single
• 2 — Dual
• 4 — Quad
• 8 — Octal
• 16 — Hexa
The following object sets up the Physical Memory Array Table:
Table 949. Physical Memory Array Table
Name
physicalMemoryArrayTable
Object ID 1.3.6.1.4.1.674.10892.1.1300.10
Description Defines the Physical Memory Array Table.
Syntax PhysicalMemoryArrayTableEntry
Access Not accessible
Table 950. Physical Memory Array Table Entry
Name
physicalMemoryArrayTableEntry
Object ID 1.3.6.1.4.1.674.10892.1.1300.10.1
Description Defines the Physical Memory Array Table entry.
Syntax PhysicalMemoryArrayTableEntry
Access Not accessible
Index
physicalMemoryArraychassisIndex
,
physicalMemoryArrayIndex
Table 951. Physical Memory Array Chassis Index
Name
physicalMemoryArraychassisIndex
Object ID 1.3.6.1.4.1.674.10892.1.1300.10.1.1
Description Defines the index (one-based) of this chassis.
Server Administrator Group 209