Users Guide

• Flow Control
• Channel Privilege Level Limit
5 Click Apply Changes.
6 Click Terminal Mode Settings.
In the Terminal Mode Settings window, you can congure terminal mode settings for the serial port.
Terminal mode is used for Intelligent Platform Interface Management (IPMI) messaging over the serial port using printable ASCII
characters. Terminal mode also supports a limited number of text commands to support legacy, text-based environments. This
environment is designed so that a simple terminal or terminal emulator can be used.
7 Specify the following customizations to increase compatibility with existing terminals:
• Line Editing
• Delete Control
• Echo Control
• Handshaking Control
• New Line Sequence
• Input New Line Sequence
8 Click Apply Changes.
9 Click Back To Serial Port Conguration Window to go to back to the Serial Port Conguration window.
Conguring The Remote Access Device To Use A
Serial Over LAN Connection
To congure the BMC/iDRAC for communication over a serial over LAN (SOL) connection:
1 Click the Modular Enclosure > System/Server Module > Main System Chassis/Main System > Remote Access object.
2 Click the Conguration tab.
3 Click Serial Over LAN .
The Serial Over LAN Conguration window appears.
4 Congure the following details:
• Enable Serial Over LAN
• Baud Rate
• Minimum Privilege Required
5 Click Apply Changes.
6 Click Advanced Settings to further congure BMC.
7 In the Serial Over LAN Conguration Advanced Settings window, you may congure the following information:
• Character Accumulate Interval
• Character Send Threshold
8 Click Apply Changes.
9 Click Go Back to Serial Over LAN Conguration to return to the Serial Over LAN Conguration window.
Additional Conguration For iDRAC
To congure the IPv4 and IPv6 properties using the Additional Conguration tab:
1 Click the Modular Enclosure→ System/Server Module → Main System Chassis/Main System→ Remote Access object
2 Click the Conguration tab.
3 Click Additional Conguration.
4 Congure the IPv4 and IPv6 properties as Enabled or Disabled.
5 Click Apply Changes.
64
Working with remote access controller