Connectivity Guide
Table 1311. Cluster Name
Name
clusterName
Object ID 1.3.6.1.4.1.674.10892.1.1800.10.1.8
Description Denes the name of the cluster.
Syntax DellString
Access Read-only
Cluster Group Variable Values
This section includes denitions for Server Administrator-specic variable values used in this section.
Table 1312. Cluster Type
Variable Name:DellClusterType
Data Type:Integer
Possible Data Values Meaning of Data Value
unknown(1)
The cluster type is unknown.
highAvailabilityCl
uster(2)
The cluster type is a high-availability cluster.
Baseboard Management Controller Group
The Baseboard Management Controller (BMC) monitors the system for critical events by communicating with various sensors on the
system board and sends alerts and log events when certain parameters exceed their preset thresholds. The BMC Group provides
information about the BMC that may be present in your system. In addition to providing general information about the BMC, this group
provides information about the serial and local area network (LAN) interfaces of the BMC.
Baseboard Management Controller Group Tables
The objects in the BMC group dene information about the BMC and the serial and LAN interfaces that can be used to access the BMC
remotely to perform management activities. Objects for the serial interface dene the serial connection mode, ow control type and bit
rate. Objects for the LAN interface dene the media access control (MAC) address, internet protocol (IP) address, subnet mask and
default gateway.
The following MIB tables dene the BMC group:
• Baseboard Management Controller Table
• Baseboard Management Controller Serial Interface Table
• Baseboard Management Controller LAN Interface Table
Server Administrator Group
331