Connectivity Guide

Table 1021. Physical Memory Conguration Redundant Settings
Variable Name: DellPhysicalMemoryConfigRedundantSettings
Data Type: Integer
Possible Data Values Meaning of Data Value
If set to 0 (zero)
There are no redundant memory settings enabled.
unknown(1)
Redundant settings are unknown.
The following redundant settings are mutually exclusive:
spareEnabled(2)
Spare redundant memory feature is enabled.
mirrorEnabled(4)
Mirror redundant memory feature is enabled.
raidEnabled(8)
RAID redundant memory feature is enabled.
dddcCapable(16)
DDDC redundancy is enabled.
Table 1022. Physical Memory Logging Capabilities
Variable Name: DellPhysicalMemoryLoggingCapabilities
Data Type: Integer
Possible Data Values Meaning of Data Value
If set to 0 (zero)
There are no logging capabilities.
unknown Capabilities(1)
Logging capabilities are unknown.
The logging capabilities are:
enableCapable(2)
Logging enable/disable using Simple Network Management
Protocol (SNMP) is supported.
Table 1023. Physical Memory Logging Settings
Variable Name: DellPhysicalMemoryLoggingSettings
Data Type: Integer
Possible Data Values Meaning of Data Value
If set to 0 (zero)
There are no logging settings enabled. unknown
Capabilities(1)
Logging capabilities are unknown.
The logging settings are:
enabled(2)
Logging is disabled (0), or enabled (1).
BIOS Setup Control Group
Basic Input/Output System (BIOS) Setup Control Group variables provide information about the functions that the BIOS performs in your
system. This management information base (MIB) group includes variables for the boot sequence, speakers, diskettes, ports, network
interface controllers (NICs), and the Wakeup on local area network (LAN) feature.
Server Administrator Group
265