Connectivity Guide

Table 923. SD Card Device Cong Settings
Variable Name:DellSDCardDeviceConfigSettings
Data Type:Integer
NOTE: These values are bit elds, so combination values are
possible.
Possible Data Values Meaning of Data Value
none(0)
SD card device has none of the following settings.
sdEnabled(1)
SD media is enabled.
vFlashEnabled(2)
Virtual Flash (vFlash) is enabled.
Table 924. SD Card Device Card State
Variable Name:DellSDCardDeviceCardState
Data Type:Integer
Possible Data Values Meaning of Data Value
none(0)
SD card state is none of the following states.
present(1)
Device is present.
ipmiReady(2)
Device is IPMI ready.
fullReady(4)
Device is full ready.
offline(8)
Device is oine.
failed(16)
Device is failed.
active(32)
Device is active.
bootable(64)
Device is bootable.
writeProtect(128)
Device is write-protected.
standby(256)
Device is in standby mode.
Table 925. SD Card Device Card Licensed
Variable Name:DellSDCardDeviceCardLicensed
Data Type:Integer
Possible Data Values Meaning of Data Value
unlicensed(0)
SD card is not licensed by system vendor.
licensed(1)
SD card is licensed by system vendor.
ipmiReady(2)
Device is IPMI ready.
fullReady(4)
Device is full ready.
offline(8)
Device is oine.
failed(16)
Device is failed.
active(32)
Device is active.
bootable(64)
Device is bootable.
writeProtect(128)
Device is write-protected.
Server Administrator Group 239