CLI Guide

name=value pair 1 cong= name=value pair 2 Description
mode=directbasic | directterminal |
directbasicterminal | modembasic |
modemterminal | modembasicterminal
directbasic: Type of messaging used for IPMI messaging over
a serial connection.
directterminal: Type of messaging that uses printable ASCII
characters and allows a limited number of text commands over
a serial connection.
directbasicterminal: Both basic and terminal mode messaging
over a serial connection.
modembasic: Type of messaging used for IPMI messaging
over a modem.
modemterminal: Type of messaging that uses printable ASCII
characters and allows a limited number of text commands over
a modem.
modembasicterminal: Both basic and terminal messaging over
a modem.
NOTE: All commands may not be supported on the
system.
privilegelevel=administrator | operator |
user
administrator: Sets the maximum privilege level that are
accepted on a serial connection, to Administrator.
operator: Sets the maximum privilege level that are accepted
on a serial connection, to Operator.
user: Sets the maximum privilege level that are accepted on a
serial connection, to User.
cong=serialoverlan enable=true | false
true: Enables serial over LAN for the BMC.
false: Disables serial over LAN for the BMC.
baudrate=9600 | 19200 | 38400 | 57600 |
115200
9600: Sets the volatile and nonvolatile connection speed to
9600 bits per second.
19200: Sets the volatile and non-volatile connection speed to
19200 bits per second.
38400: Sets the volatile and non-volatile connection speed to
38400 bits per second.
57600: Sets the volatile and non-volatile connection speed to
57600 bits per second.
115200: Sets the volatile and non-volatile connection speed to
115200 bits per second.
privilegelevel=administrator | operator |
user
administrator: Sets the maximum privilege level that are
accepted on a serial over LAN channel, to Administrator.
operator: Sets the maximum privilege level that are accepted
on a serial over LAN channel, to Operator.
user: Sets the maximum privilege level that are accepted on a
serial over LAN channel, to User.
cong=settodefault Takes the default conguration settings.
Omcong Managing Components Using The Instrumentation Service 87