CLI Guide

Group name=value pair 1 attribute= name=value pair 2 setting=
NOTE: The option is supported only
on 13G and later systems.
attribute=TpmCommand
NOTE: The option is supported only
on 13G and later systems.
setting=None | Activate | Deactivate | Clear
attribute=TpmStatus setting=<string>
attribute=TcmActivation
NOTE: The option is not supported
on Dell PowerEdge 13G and later
systems.
setting=NoChange | Activate | Deactivate
attribute=TcmClear
NOTE: The option is not supported
on Dell PowerEdge 13G and later
systems.
CAUTION: Clearing the TCM will
cause loss of all keys in the TCM.
This could aect booting of the
operating system.
setting=Yes | No
attribute=TcmSecurity
NOTE: The option is not supported
on Dell PowerEdge 13G and later
systems.
setting=O | OnPbm | OnNoPbm
attribute=SecureBoot
NOTE: The option is supported only
on 13G and later systems.
setting=Enabled | Disabled
attribute=SecureBootPolicy
NOTE: The option is supported only
on 13G and later systems.
setting=Enabled | Disabled
attribute=UeVariableAccess setting=Standard | Controlled
UEFI Boot Settings attribute=UeBootSeq sequence=aliasname1, aliasname2,.....
aliasnameN
Omcong Chassis Currents Or Omcong Mainsystem Currents
NOTE
: This command is no longer available through Server Administrator.
Omcong Chassis Fans Or Omcong Mainsystem Fans
Use the omcong chassis fans or omcong mainsystem fans command to set fan probe warning thresholds. As with other components,
you can view both warning and failure threshold values, but you cannot set failure thresholds. The system manufacturer sets the minimum
and maximum failure thresholds.
Omcong
Managing Components Using The Instrumentation Service 75