CLI Guide

Group name=value pair 1 attribute= name=value pair 2 setting=
attribute=SataPortADriveType -
SataPortJDriveType
setting=<string>
attribute=SataPortAModel -
SataPortJModel
setting=<string>
attribute=SecurityFreezeLock setting=Enabled | Disabled
attribute=WriteCache setting=Enabled | Disabled
Serial Communication attribute=ConTermType setting=Vt100Vt220 | Ansi
attribute=ExtSerialConnector setting=Serial1 | Serial2 | RemoteAccDevice
attribute=FailSafeBaud setting=115200 | 57600 | 19200 | 9600
attribute=RedirAfterBoot setting=Enabled | Disabled
attribute=SerialComm setting=OnNoConRedir | OnConRedirCom1 |
OnConRedirCom2 | O
attribute=SerialPortAddress setting=Serial1Com1Serial2Com2 |
Serial1Com2Serial2Com1 | Com1 | Com2
Slot Disablement attribute=Slotn setting=Enabled | Disabled |
BootDriverDisabled
System Information attribute=SysMfrContactInfo setting=<string>
attribute=SystemBiosVersion setting=<string>
attribute=SystemManufacturer setting=<string>
attribute=SystemModelName setting=<string>
attribute=SystemServiceTag setting=<string>
attribute=SystemMeVersion
NOTE: The option is supported only
on 13G and later systems.
setting=<string>
attribute=UeComplianceVersion
NOTE: The option is supported only
on 13G and later systems.
setting=<string>
attribute=SystemCpldVersion setting=<string>
System Prole Settings attribute=MemFrequency setting=MaxPerf |1866MHz | 1600MHz |
1333MHz |1067MHz | 800MHz |
MaxReliability
attribute=MemPatrolScrub setting=Standard | Extended | Disabled
attribute=MemRefreshRate setting=1x | 2x
attribute=MemVolt
setting=AutoVolt | Volt15V | Volt135V
NOTE: Volt15V represents 1.5 Volt
and Volt135V represents 1.35 Volt
attribute=ProcC1E setting=Enabled | Disabled
attribute=ProcCStates setting=Enabled | Disabled
attribute=ProcPwrPerf setting=MaxPerf | MinPwr | SysDbpm |
OsDbpm
Omcong Managing Components Using The Instrumentation Service 73