CLI Guide

name=value pair 1 attribute= name=value pair 2 setting= Description
• force=true: Verication of setting
change.
attribute=rombb setting=raid | scsi force=true
• raid: Instructs the BIOS to detect RAID-
on-motherboard channel B as a RAID
device.
• scsi: Instructs the BIOS to detect the
RAID-on-motherboard device as a SCSI
device.
• force=true: Verication of setting
change.
attribute=sata setting=o | ata | raid
• o: Disables the SATA controller.
• ata: Sets the onboard SATA controller to
ATA mode.
• raid: Sets the onboard SATA controller to
RAID mode.
attribute=sataport (0...7) or (a...h) setting=o | auto
• o: Disables the SATA port.
• auto: Automatically enables the SATA
port.
attribute=secondaryscsi setting=on | o
• on: Enables secondary SCSI.
• o: Disables this device.
attribute=serialportaddr setting=default | alternate | com1 | com2
• default: Maps to Serial device1=COM1,
Serial device2=COM2.
• alternate: Maps to Serial
device1=COM2, Serial device2=COM1
• com1: Sets serial port address to COM1.
• com2: Sets serial port address to COM2.
attribute=serialcom setting=o | on | com1 | com2 |
onwithconsole
• o: Disables serial communication
setting.
• on: Enables serial communication setting
without console redirection.
• com1: Enables serial communication
setting with console redirection through
COM1.
• com2: Enables serial communication
setting with console redirection through
COM2.
• onwithconsole: Enables serial
communication with console redirection
through COM1 and COM2.
NOTE: The setting onwithconsole is
supported only on Dell blade
systems.
attribute=serialport1 setting=o | auto | com1 | com3 | bmcserial
| bmcnic | rac | com1bmc
• o: Disables serial port 1.
• auto: Maps serial port 1 to a COM port.
• com1: Maps serial port 1 to COM port 1.
• com3: Maps serial port 1 to COM port 3.
• bmcserial: Maps serial port 1 to BMC
Serial.
Omcong Managing Components Using The Instrumentation Service 67