CLI Guide

name=value pair 1 attribute= name=value pair 2 setting= Description
attribute=esataport setting=o | auto
• o: Sets the embedded SATA port value
to o.
• auto: Sets the embedded SATA port
value to auto.
attribute=extserial setting=com1 | com2 | rad
• com1: Maps the external serial connector
to COM 1.
• com2: Maps the external serial
connector to COM 2.
• rad: Maps the external serial connector
to the remote access device.
attribute=fbr setting=9600 | 19200 | 57600 | 115200
• 9600: Sets the console redirection
failsafe baud rate to 9600 bits per
second.
• 19200: Sets the console redirection
failsafe baud rate to 19200 bits per
second.
• 57600: Sets the console redirection
failsafe baud rate to 57600 bits per
second.
• 115200: Sets the console redirection
failsafe baud rate to 115200 bits per
second.
attribute=htassist setting=enabled | disabled
• enabled: Enables the probe lter chipset
option.
• disabled: Disables the probe lter chipset
option.
NOTE: Certain applications do not
function fully if you enable or disable
this option.
attribute=ide setting=on | o force=true
• on: Enables IDE.
• o: Disables IDE.
• force=true: Verication of setting
change.
attribute=idepridrv setting=o | auto
• o: Disables the device.
• auto: Detects and enables the device
automatically.
attribute=intrusion setting=enabled | disabled
• enabled: Enables the intrusion check
during system boot. If the system also
has bezel intrusion checking, then the
intrusion option checks for removal of
the bezel of the system.
• disabled: Disables the intrusion check
during system boot.
attribute=mouse setting=on | o
• on: Enables the mouse.
• o: Disables the mouse.
attribute=nic1 setting=enabled | enabledwithpxe | disabled
| enabledonly | enablednonepxe |
enabledwithiscsi
• enabled: Enables the rst NIC during
system boot.
64 Omcong Managing Components Using The Instrumentation Service