CLI Guide
name=value pair 1 attribute= name=value pair 2 setting= Description
• 10: Enables ten cores per processor.
• 12: Enables twelve cores per processor.
• all: Enables the maximum cores per
processor.
attribute=dbs setting=enable | disable
• enable: Enables Demand Based
Switching (DBS) on the system.
• disable: Disables DBS on the system.
attribute=diskette setting=o | auto | writeprotect
• o: Disables the diskette drive.
• auto: Auto-enables the diskette drive.
• writeprotect: The diskette drive is
available in read-only format only. Makes
the diskette drive read-only.
attribute=dualnic setting=o | on | pxeboth | nic1pxe |nic2pxe
| isciboth | nic1isci | nic2isci | nic1pxenic2isci
| nic1iscinic2pxe | onpxeboth | onpxenone |
onpxenic1 | onpxenic2
• o: Disables the Network Interface
Controllers (NICs).
• on: Enables the network interface (PXE
or iSCSI is not enabled on either of the
NICs).
• pxeboth: Enables PXE on both NICs.
• nic1pxe: Enables PXE on the rst NIC
and none (no PXE or iSCSI) on the
second NIC.
• nic2pxe: Enables none (no PXE or iSCSI)
on rst NIC and PXE on the second NIC.
• isciboth: Enables iSCSI on both the
NICs.
• nic1isci: Enables iSCSI on the rst NIC
and none (no PXE or iSCSI) on the
second NIC.
• nic2isci: Enables none (no PXE or iSCSI)
on the rst NIC and iSCSI on the second
NIC.
• nic1pxenic2isci: Enables PXE on the rst
NIC and iSCSI on second NIC.
• nic1iscinic2pxe: Enables iSCSI on the
rst NIC and PXE on second NIC.
The following options are deprecated:
• onpxeboth: Enables PXE on both the
NICs.
• onpxenone: PXE is not enabled on either
of the NICs.
• onpxenic1: Enables PXE on NIC 1.
• onpxenic2: Enables PXE on NIC 2.
attribute=embhypvisor
setting=enabled | disabled
• enabled: Enables the embedded
hypervisor.
• disabled: Disables the embedded
hypervisor.
attribute=embvideoctrl setting=enabled | disabled
• enabled: Enables the embedded video
controller as the primary video device.
• disabled: Disables the embedded video
controller as the primary video device.
Omcong Managing Components Using The Instrumentation Service 63