CLI Guide
name=value pair 1 attribute= name=value pair 2 setting= Description
NOTE: On Linux systems, user or
user groups upgraded to
administrator or administrator
groups cannot congure this BIOS
setup setting.
attribute=hddorder sequence=aliasname1, aliasname2,.....
aliasnameN
Congures the BIOS setup hard disk
sequence according to the set aliasnames.
Changes takes eect after rebooting the
system. To view the set alias names, run the
command omreport chassis
biossetup attribute=bootorder
NOTE: On Linux systems, user or
user groups upgraded to
administrator or administrator
groups cannot congure this BIOS
setup setting.
attribute=cstates setting=enabled | disabled
• enabled: Enables the processor to go
into a deep sleep state when the system
is not utilized.
• disabled: Disables the processor to go
into a deep sleep state when the system
is not utilized.
attribute=conredirect setting=enabled | disabled
• enabled: Redirects the BIOS screen
output over serial port 1. Keyboard and
text output are redirected over serial port
2.
• disabled: Turns o the BIOS console
redirection.
attribute=cpucle setting=enabled | disabled
• enabled: Enables processor C1-E after
system reboot.
• disabled: Disables processor C1-E after
system reboot.
attribute=cpuht setting=enabled | disabled
• enabled: Enables logical processor
hyperthreading.
• disabled: Disables logical processor
hyperthreading.
attribute=cpuvt setting=enabled | disabled
• enabled: Enables virtualization.
• disabled: Disables virtualization.
attribute=cpuxdsupport setting=enabled | disabled
• enabled: Enables Execute Disable (XD)
support on the system.
• disabled: Disables XD support on
system.
attribute=cpucore setting=1 | 2 | 4 | 6 | 8 | 10 | 12 |all
• 1: Enables one core per processor.
• 2: Enables two cores per processor.
• 4: Enables four cores per processor.
• 6: Enables six cores per processor.
• 8: Enables eight cores per processor.
62 Omcong Managing Components Using The Instrumentation Service