CLI Guide

The symbol |, often called pipe, is the logical exclusive or operator. For example, enable | disable means you can enable or disable the
component or feature, but you cannot simultaneously enable and disable the component or feature.
omcong Command Summary
The following table provides a high-level summary of the omcong command. The columns titled Command level 2 and Command level 3
list the major arguments that are used with omcong. User privilege required refers to the type of privilege you need to run the command,
where U = User, P = Power User, and A = Administrator. Use is a very general statement about the actions that are performed using
omcong.
NOTE: Although the following table lists all possible omcong commands, the commands available on the system depend on the
system conguration. If you try to get help or run a command for a component not installed on the system, Server Administrator
displays a message that the component or feature is not found on the system.
NOTE: When CSIOR (Collect System Inventory on Restart) is disabled, omcong does not allow to congure the BIOS settings.
Table 42. omcong Command Level 1, Level 2, and Level 3
Command
Level 1
Command Level 2 Command Level 3 User
Privilege
Required
Use
omcong
about U, P, A Shows the version number and properties for the Server
Administrator program.
details=true U, P, A Displays information for all Server Administrator programs that
are installed.
preferences
cdvformat A Species the delimiter for separating data elds reported in
custom delimited format (cdv).
dirservice A Congures the Microsoft Active Directory service.
messages A Displays the congured alert message format.
useraccess A Determines whether users below the administrator level are
allowed to use Server Administrator or not.
webserver A Allows the administrator to set the encryption levels of the Web
server and congure the URL launch point in the Server
Administrator Web server environment.
system or
servermodule
alertaction P, A Determines in advance the actions taken for warning or failure
events on intrusion, fans, temperatures, voltages, power
supplies, memory, and redundancy.
alertlog P, A Allows the administrator to clear the alert log.
assetinfo P, A Enters and edits cost of ownership information for the system,
including values for depreciation, lease, maintenance, service,
and support.
cmdlog P, A Allows the administrator to clear the command log.
esmlog P, A Allows the administrator to clear the ESM log.
events P, A Enables or disables SNMP traps.
Omcong Managing Components Using The Instrumentation Service 57