CLI Guide
The output that is displayed is as follows:
Log Critical : false
Log Warning : true
Log Informational : true
Omreport preferences webserver
Use the omreport preferences webserver command to view the URL details, current key-sign algorithm, and the JRE details.
The following table lists the available attributes of omreport preferences webserver.
Table 40. Valid Parameters Of Omreport Preferences Webserver
name=value pair Description
attribute=geturl Reports the URL information of the web server. This command helps to access the
Server Administrator GUI using a remote web server (management system).
attribute=getsignalgorithm Reports the current key-sign algorithm.
attribute=getjre Displays the version of the currently used JRE.
attribute=getjrelist Displays the supported JRE versions installed in the system.
attribute=getciphers Displays the current cipher values congured.
attribute=getsslprotocol Displays the current SSL Protocol values set.
attribute=getport Displays the information of the congured port value.
attribute=getipaddress Reports the congured IP Address value.
attribute=getsessiontimeout Displays the congured session time-out value.
Type:
omreport preferences webserver attribute=getjrelist
The output that is displayed is as follows:
Version: 1.7.0_05 (Bundled)
Path : C:\Program Files <x86>\Dell|SysMgt\jre
Version:1.7.0_03
Path:C:\Program Files <x86>\Java\jre7
omreport Viewing System Status Using The Instrumentation Service
55