CLI Guide

Output Attributes Description
Destination Conguration
Settings
attribute=communitystring
communitystring: Displays the text string that acts as a password and
is used to authenticate SNMP messages sent between the BMC and
the destination management station
.
NOTE: On 12G systems with iDRAC7 specic versions, ipaddress can also be a Fully Qualied Domain Name (FQDN).
Omreport System Platformevents Or Omreport Servermodule
Platformevents
Use the omreport system platformevents or omreport servermodule platformevents command to view how the system responds for each
listed platform event.
NOTE: To maintain consistency across the commands, the output format of this command has changed. Change the user scripts
as applicable.
Omreport System Recovery Or Omreport Servermodule
Recovery
Use the omreport system recovery or omreport servermodule recovery command to see whether there is an action congured for a hung
operating system. You can also view the number of seconds that must elapse before an operating system is considered hung.
Omreport System Shutdown Or Omreport Servermodule
Shutdown
Use the omreport system shutdown or omreport servermodule shutdown command to view any pending shutdown actions for the system.
If properties for shutdown are congured, executing this command displays these properties.
Omreport System Summary Or Omreport Servermodule
Summary
Use the omreport system summary or omreport servermodule summarycommand to view a comprehensive summary of software and
hardware components currently installed on the system. Type:
omreport system summary
or
omreport servermodule summary
NOTE
: If the vFlash or SD card size is less than 1 GB, the size is displayed in MB.
NOTE: If iDRAC is installed, Server Administrator displays the LCC version. If BMC is installed, Server Administrator displays the
USC version.
48 omreport Viewing System Status Using The Instrumentation Service