CLI Guide

-----------
Fans Group
----------
Settings
Enable: Informational, Warning, and Critical
Disable: None
-----------
Individual Objects
-----------
System Board Fan1 RPM Settings
Index:0
Enable: Informational, Warning, and Critical
Disable: None
System Board Fan2 RPM Settings
Index:1
Enable: Informational, Warning, and Critical
Disable: None
Omreport System snmptrapdest Or Omreport Servermodule
snmptrapdest
Use the omreport system snmptrapdest or omreport servermodule snmptrapdest command to view the congured SNMP trap
destinations.
When the system is congured with the IP destinations, the following list of IP address is displayed:
Destination1 : <ip address1>
Destination2 : <ip address2>
Destination3 : <ip address3>
Omreport System Operatingsystem Or Omreport
Servermodule Operatingsystem
Use the omreport system operatingsystem or omreport servermodule operatingsystem command to display information about the
operating system.
Omreport System Pedestinations Or Omreport Servermodule
Pedestinations
Use the omreport system pedestinations or omreport servermodule pedestinations command to view destinations where alerts are sent for
platform events. Depending on the number of destinations displayed, congure a separate IP address for each destination address. Type:
omreport system pedestinations
or
omreport servermodule pedestinations
The output of the omreport system pedestinations or omreport servermodule pedestinations command lists each of the valid parameters.
NOTE
: To maintain consistency across the commands, the output format of this command has changed. Change the user scripts
as applicable.
46 omreport Viewing System Status Using The Instrumentation Service