CLI Guide

The following is an example output if you specify the index:
Table 20. Index detail
Memory Device Information
Health : Ok
Status : Ok
Device Name : A2
Size : 16384 MB
Type : DDR4 Synchronous Registered (Buffered)
Speed : 0.38 ns
Rank : Dual
Failures : None
Technology : DRAM
Volatile Size : 1717989184
Non-Volatile Size : N/A
Cache Size : N/A
Remaining Rated Write Endurance : 23%
Use the Omreport chassis memory index to view details of memory device properties of a particular connector using its index number. If
the system supports redundant memory, this command also displays the status, device name, speed, and type of memory redundancy
implemented on the system. Type:
omreport chassis memory index=n speedunit=mtps
or
omreport chassis memory index=n speedunit=ns
The speedunit parameter is optional. If you do not specify the speedunit, Server Administrator displays the speed in ns (Default
output).
Table 21. Speedunit detail
Memory Device Information
Health : Ok
Status : Ok
Device Name : A2
Size : 4096 MB
Type : DDR4 Synchronous Registered (Buffered)
Speed : 0.47 ns
Rank : Single
Failures : None
If you specify the speedunit MT/s, Server Administrator displays the speed in MT/s.
omreport Viewing System Status Using The Instrumentation Service
31