CLI Guide

Group Description

Processor Settings Controls the processor settings of the system.

SATA Settings Control the embedded SATA ports settings.

Serial Communication Controls the Serial Communication options.

Slot Disablement Controls the system slots that are present on the system.

System Information Displays the information that uniquely identies the system.

System Prole Settings Controls the power management settings.

System Security Controls the security features of the system.

UEFI Boot Settings Controls the system boot settings when boot mode is set to ue.

Omreport Chassis Currents Or Omreport Mainsystem Currents

This command is no longer available through Server Administrator.

Omreport chassis fans or omreport mainsystem fans

Use the omreport chassis fans or omreport mainsystem fans command to view the fan probe status and settings. Type:

omreport chassis fans index=n

omreport mainsystem fans index=n

The index parameter is optional. If you do not specify the index, Server Administrator displays a summary of status, readings, and

thresholds set for any fan probes that are present on the system. If you specify the index, Server Administrator displays a summary for a

specic fan probe.

NOTE

: On servers in the Dell PowerEdge FX2 series chassis, this command is supported only if the Chassis Management at

Server Mode is set to either Monitor or Manage and Monitor in the CMC, and Server Administrator displays the Chassis

Management at Server Mode as Enabled. For more details, see Chassis Management.

Omreport Chassis Firmware Or Omreport Mainsystem

Firmware

Use the omreport chassis rmware or omreport mainsystem rmware command to view current rmware properties. When you type:

omreport chassis firmware

omreport mainsystem firmware

Server Administrator displays a summary of the system’s rmware properties.

NOTE

: To maintain consistency across the commands, the output format of this command has changed. Change the user scripts

as applicable.

NOTE: If iDRAC is installed, Server Administrator displays the Lifecycle Controller version. If BMC is installed, Server

Administrator displays the Unied Server Congurator (USC) version.

26 omreport Viewing System Status Using The Instrumentation Service