CLI Guide

Related Links: omreport: Viewing System Status Using The Instrumentation Service
Help With The omreport Command
Use the omreport -? command to get a list of the available commands for omreport.
Use omreport <command level 2> -? to get help on the level 2 about, chassis, and system commands. The following information on
omreport system -? also applies to get help for the omreport chassis command.
To see a list of valid commands for omreport system, type:
omreport system -? | more
omreport modularenclosure
Use the omreport modularenclosure command to view details of the Blade system. Type:
omreport modularenclosure
NOTE: This CLI command is available when OpenManage Server Administrator is installed on Dell Blade systems.
Server Administrator displays information related to the modular enclosure and chassis management controller CMC (if available):
NOTE: The output varies depending on the conguration of the system.
Table 8. Output
Modular Chassis Information
Chassis Information
Attribute : Model
Value : Modular Server Enclosure
Attribute : Lock
Value : true
Attribute : Service Tag
Value : 8RLNB1S
Attribute : Express Service Code
Value : 18955029124
CMC Information
Attribute : Product
Value : Chassis Management Controller (CMC)
Attribute : Description
Value : The system component provides a complete set of remote
managementfunctions for Dell systems.
Attribute : Version
Value : 3.20
Attribute : IP Address
Value : 101.102.103.104
Attribute : IP Address Source
Value : Dynamic Source
omreport Viewing System Status Using The Instrumentation Service 21