CLI Guide

NOTE: If you set escrow=yes, specify the escrow le
path.
Omcong Rekey LKM Controller
Table 193. Omcong Rekey LKM Controller
Description Re-keys the encryption key in LKM mode for the controller.
Syntax
omconfig storage controller action=rekeylkm controller=id keyid=<keyid>
passphrase=<passphrase string> escrow=yes filepath=<Absolute path to the escrow
file>, where id is the controller ID as reported by the omreport storage controller command.
Example to Re-key the encryption key for the controller.
Example
omconfig storage controller action=rekeylkm controller=1
Omcong Convert Multiple RAID To Non-RAID
Table 194. Omcong Convert Multiple RAID To Non-RAID
Description Converts multiple RAID to non-RAID on the given controller.
Syntax
omconfig storage controller action=convertraidtononraid controller=id
pdisk=<PDISKID>, where id is the controller ID as reported by the omreport storage controller
command and PDISKID is specied as pdisk=connector:enclosureID:targetID |
connector:targetID
.
Example to Convert multiple non-RAID to RAID on controller 0.
Example
omconfig storage controller action=convertnonraidtoraid controller=0
pdisk=0:2:3
Omcong Convert Multiple Non-RAID To RAID
Table 195.
Omcong Convert Multiple Non-RAID To RAID
Description Converts multiple non-RAID to RAID on the given controller.
Syntax
omconfig storage controller action=convertnonraidtoraid controller=id
pdisk=<PDISKID>, where id is the controller ID as reported by the omreport storage controller
command and PDISKID is specied as pdisk=connector:enclosureID:targetID |
connector:targetID
.
Example to Convert multiple non-RAID to RAID on controller 0,
Example
omconfig storage controller action=convertnonraidtoraid controller=0
pdisk=0:2:3
Omcong storage commands 179