CLI Guide
Omcong Change Encryption Key
Table 175. Omcong Change Encryption Key
Description Changes the encryption key for the controller, if passphrase is provided.
Syntax
omconfig storage controller action= changesecuritykey controller=id keyid=<keyid
string> passphrase=passphrase string> oldpassphrase=<old passphrase
string>[escrow=yes]>
Example to Change the encryption key for the controller.
Example
omconfig storage controller action= changesecuritykey controller=1 keyid=Dell_123
passphrase=Dell_123 oldpassphrase=Dell_321 escrow= yes
NOTE: If you set escrow=yes, escrow le is copied to the location C:/Windows (for Microsoft Windows)
and /var/log (for Linux / ESxi) in Managed Node when the DWS is used.
File name will be generated having combination of controller model & SAS Address as le name. Sample le name for an
H740 controller with SAS address xxxyyzz will be Dell_H740_xxxyyzz.xml.
Omcong Delete Encryption Key
Table 176.
Omcong Delete Encryption Key
Description Deletes the encryption key for the controller.
Syntax omconfig storage controller action= deletesecuritykey controller=id, where id is the
controller ID as reported by the omreport storage controller command.
Example to Change the encryption key for the controller.
Example
omconfig storage controller action= deletesecuritykey controller=1
Omcong Set Background Initialization Rate
Table 177.
Omcong Set Background Initialization Rate
Description Sets the background initialization rate.
Syntax omconfig storage controller action=setbgirate controller=id rate=<0 to 100>, where id is
the controller ID as reported by the omreport storage controller command.
Example to Sets the background initialization rate to 50 on controller 1.
Example
omconfig storage controller action=setbgirate controller=1 rate=50
Omcong storage commands 173