CLI Guide

Example to Rescan controller 1.
Example
omconfig storage controller action=rescan controller=1
NOTE: The rescan controller is not supported on non-RAID SCSI and SAS controllers. Reboot
the system to make the conguration changes visible on non-RAID SCSI controllers.
Omcong Enable Controller Alarm
Table 153. Omcong Enable Controller Alarm
Description Enables the controller alarm. For more information, see the Dell EMC OpenManage Online Help .
Syntax omconfig storage controller action=enablealarm controller=id, where id is the
controller ID as reported by the omreport storage controller command.
Example to Enable the alarm on controller 1.
Example
omconfig storage controller action=enablealarm controller=1
Omcong Disable Controller Alarm
Table 154.
Omcong Disable Controller Alarm
Description Disables the controller alarm. For more information, see the Dell EMC OpenManage Online Help .
Syntax omconfig storage controller action=enablealarm controller=id, where id is the
controller ID as reported by the omreport storage controller command.
Example to Disable the alarm on controller 1.
Example
omconfig storage controller action=disablealarm controller=1
Omcong Quiet Controller Alarm
Table 155.
omcong Quiet Controller Alarm
Description Silences an activated controller alarm. For more information, see the Dell EMC OpenManage Online Help.
Syntax omconfig storage controller action=quietalarm controller=id, where id is the
controller ID as reported by the omreport storage controller command.
Example to Quiet the alarm on controller 1.
Example
omconfig storage controller action=quietalarm controller=1
Omcong storage commands 163