CLI Guide
Omcong Secure Virtual Disk
Table 146. omcong Secure Virtual Disk
Description Encrypts a virtual disk.
Syntax omconfig storage vdisk action=securevd controller=id vdisk=id, where id is the
controller ID and virtual disk ID as reported by the omreport command.
NOTE: To obtain these values, type omreport storage controller to display the controller IDs
and then type omreport storage vdisk controller=ID to display the IDs for the virtual disks
attached to the controller.
Example to Encrypt virtual disk 4 on controller 1.
Example
omconfig storage vdisk action=securevd controller=1 vdisk=4
Omcong Clear Virtual Disk Bad Blocks
Table 147. omcong Clear Virtual Disk Bad Blocks
Description Clears virtual disk bad blocks.
Syntax omconfig storage vdisk action=clearvdbadblocks controller=id vdisk=id,
where id is the controller ID and virtual disk ID as reported by the omreport command.
NOTE: To obtain these values, type omreport storage controller to display the controller IDs
and then type omreport storage vdisk controller=ID to display the IDs for the virtual disks
attached to the controller.
Example to Clear bad blocks on virtual disk 4 on controller 1.
Example
omconfig storage vdisk action=clearvdbadblocks controller=1 vdisk=4
Omcong Change Virtual Disk Policy
Table 148.
omcong Change Virtual Disk Policy
Description Changes a virtual disk’s read, write, or cache policy.
Syntax
omconfig storage vdisk action=changepolicy controller=id vdisk=id
[diskcachepolicy=<enabled|disabled> | readpolicy=<ra| nra| ara| rc|nrc> |
writepolicy=<wb| wt| wc| nwc> | fwb> cachepolicy=<d | c>], where id is the
controller ID and virtual disk ID as reported by the omreport command.
NOTE: To obtain these values, type omreport storage controller to display the controller IDs
and then type omreport storage vdisk controller=ID to display the IDs for the virtual disks
attached to the controller.
Omcong storage commands 159