CLI Guide

pdisk=<PDISKID>, where id is the controller ID. The <PDISKID>
variable species the physical disk.
NOTE: To obtain these values, type omreport storage
controller to display the controller IDs and then type
omreport storage pdisk controller=ID to display the IDs for
the physical disks attached to the controller.
Example to Enable write cache on physical disk 3 on connector 0 of controller 1.
On a SAS controller, the physical disk resides in enclosure 2.
Example for SAS controllers
omconfig storage pdisk
action=enabledevicewritecache controller=1
pdisk=0:2:3
Omcong Disable Device Write Cache
Table 126. omcong Disable Device Write Cache
Description
Disables write cache on a physical disk for the PCIe SSD controller.
Syntax
omconfig storage pdisk
action=disabledevicewritecache controller=id
pdisk=<PDISKID>, where id is the controller ID. The <PDISKID>
variable species the physical disk.
NOTE: To obtain these values, type omreport storage
controller to display the controller IDs and then type
omreport storage pdisk controller=ID to display the IDs for
the physical disks attached to the controller.
Example to Disable write cache on physical disk 3 on connector 0 of controller
1. On a SAS controller, the physical disk resides in enclosure 2.
Example for SAS controllers
omconfig storage pdisk
action=disabledevicewritecache controller=1
pdisk=0:2:3
Omcong Export Reliability Log
Table 127.
omcong Export Reliability Log
Description
Exports log on a physical disk or the NVMe adapter. The reliability
log for the device PCIe SSD device or NVMe device is exported to
the Windows folder on systems running Windows, and to /var/log
directory on systems running Linux.
Syntax
omconfig storage pdisk action=exportlog
controller=id pdisk=<PDISKID>
filename=<filename>, where id is the controller ID . The
<PDISKID> variable species the physical disk.
Omcong storage commands 149