CLI Guide

Omcong Cancel Rebuild Physical Disk
Table 121. omcong Cancel Rebuild Physical Disk
Description
Cancels a rebuild that is in progress. If you cancel a rebuild, the
virtual disk remains in a degraded state. For more information about
Cancel Rebuild Physical Disk, see the Dell EMC OpenManage
Online Help.
Syntax
omconfig storage pdisk action=cancelrebuild
controller=id pdisk=<PDISKID>, where id is the controller
ID. The <PDISKID> variable species the physical disk.
NOTE: To obtain these values, type omreport storage
controller to display the controller IDs and then type
omreport storage pdisk controller=ID to display the IDs for
the physical disks attached to the controller.
Example to Cancel the rebuild of physical disk 3 on connector 0 of controller 1.
On a SAS controller, the physical disk resides in enclosure 2.
Example for SCSI, SATA, and ATA controllers
omconfig storage pdisk action=cancelrebuild
controller=1 pdisk=0:3
Example for SAS controllers
omconfig storage pdisk action=cancelrebuild
controller=1 pdisk=0:2:3
Omcong Cancel Replace Member
Table 122.
omcong Cancel Replace Member
Description
Cancels a replace member operation.
Syntax
omconfig storage pdisk
action=cancelreplacemember controller=id
pdisk=<PDISKID>, where id is the controller ID. The <PDISKID>
variable species the physical disk.
NOTE: To obtain these values, type omreport storage
controller to display the controller IDs and then type
omreport storage pdisk controller=ID to display the IDs for
the physical disks attached to the controller.
Example to Cancel replace member operation on disk 0:0:1 which is connected
to controller 0
Example
omconfig storage pdisk
action=cancelreplacemember controller=0
pdisk=0:0:1
Omcong storage commands 147