CLI Guide

Omreport Power Supply Status
The following table describes the syntax for the omreport Power Supply commands:
Table 99. Omreport Power Supply Commands
Required Command Levels (1, 2, 3) and
name=value pair
Optional name=value pairs Use
omreport storage enclosure Displays property information for all
enclosures attached to the system.
controller=id enclosure=<ENCLOSUREID>
info=pwrsupplies where id is the controller
number and ENCLOSUREID is the enclosure
number. For example: controller=0
enclosure=2
Displays the power supplies for the specied
enclosure.
controller=id enclosure=<ENCLOSUREID>
info=pwrsupplies index=n where id is the
controller number and ENCLOSUREID is the
enclosure number and n is the number of a
power supply. For example: controller=0
enclosure=2 info=pwrsupplies index=1
Displays the specied power supply.
Omreport EMM Status
The following table describes the syntax for the omreport EMM commands:
NOTE
: The status of the EMMs is displayed as degraded if there is a mismatch between the EMM rmware.
Table 100. Omreport EMM Commands
Required Command Levels (1, 2, 3) and
name=value pair
Optional name=value pairs Use
omreport storage enclosure Displays property information for all
enclosures attached to the system.
controller=id enclosure=<ENCLOSUREID>
info=emms where id is the controller number
and ENCLOSUREID is the enclosure
number. For example: controller=0
enclosure=2
Displays the enclosure management modules
(EMMs) for the specied enclosure.
controller=id enclosure=<ENCLOSUREID>
info=emms index=n where id is the
controller number and ENCLOSUREID is the
enclosure number and n is the number of an
EMM. For example: controller=0
enclosure=2 info=emms index=1
Displays the specied EMMs.
136 Omreport storage commands