CLI Guide

Adding system information
System information includes the primary user of the system, the phone number for the primary user, and the location of the system. The
following table displays the valid parameters for adding system information.
Table 88. Valid Parameters Of omcong system assetinfo info=system Or omcong servermodule assetinfo info=system
Command
Level 1
Command Level
2
Command
Level 3
Name= Value
Pair 1
Name= Value Pair 2 Description
omcong system or
servermodule
assetinfo info=system location=<text> Location of the system.
primaryphone=<n> Phone number of the primary user
of the system.
primaryuser=<user> Primary user of the system.
Example command for adding system information
To provide a value for a system parameter, type a command of the form omcong system assetinfo info=system <name=value pair 2> or
omcong servermodule assetinfo info=system <name=value pair 2>. For example, type:
omconfig system assetinfo info=system location=firstfloor
or
omconfig servermodule assetinfo info=system location=firstfloor
The following message is displayed:
Asset information set successfully.
You can type more than one omcong system assetinfo or omcong servermodule assetinfo command at the same time, as long as all the
parameters for name=value pair 2 belong to the same name=value pair 1. For an example, see Example Command For Adding Acquisition
Information.
Adding warranty information
Use the omcong system warranty or omcong servermodule warranty command to assign values for warranty information. A warranty is a
contract between the manufacturer or dealer and the purchaser of a system. The warranty identies the components that are covered for
repair or replacement for a specied length of time or usage. For details on editing extended warranty values, see Adding Extended
Warranty Information. The following table displays the valid parameters for adding warranty information.
Table 89. Valid Parameters Of
omcong system assetinfo info=warranty Or omcong servermodule assetinfo info=warranty
Command
Level 1
Command Level
2
Command
Level 3
Name= Value
Pair 1
Name= Value Pair 2 Description
omcong system or
servermodule
assetinfo info=warranty cost=<cost> Cost of the warranty
service.
duration=<duration> Number of days or months
that the warranty is in force.
enddate=<enddate> Date the warranty
agreement ends.
Omcong System Or Servermodule Assetinfo Editing Cost Of Ownership Values 127