CLI Guide

The following table displays the valid parameters for the command:
Table 81. Valid Parameters Of omcong system assetinfo info=extwarranty Or omcong servermodule assetinfo info=extwarranty
Command
Level 1
Command Level 2 Command
Level 3
Name= Value Pair 1 Name= Value Pair 2 Description
omcong system or
servermodule
assetinfo info=extwarranty cost=<cost> Cost of the extended
warranty service.
enddate=<enddate> Date the extended
warranty agreement ends.
provider=<provider> Business entity that
provides the extended
warranty service.
startdate=<startdate> Date the extended
warranty service begins.
Example command for adding extended warranty information
To provide a value for an extended warranty parameter, type a command of the form: omcong system assetinfo info=extwarranty
<name=value pair 2> or omcong servermodule assetinfo info=extwarranty <name=value pair 2>. For example, type:
omconfig system assetinfo info=extwarranty enddate=012503
or
omconfig servermodule assetinfo info=extwarranty enddate=012503
The following message is displayed:
Asset information set successfully.
You can type more than one omcong system assetinfo or omcong servermodule assetinfo command at the same time, as long as all the
parameters for name=value pair 2 belong to the same name=value pair 1. For an example, see Example Command For Adding Acquisition
Information.
Adding lease information
A lease is an agreement to pay for the use of a system for a specied period of time. The lessor retains ownership of the system. The
following table displays the valid parameters for the command.
Table 82. Valid Parameters Of
omcong system assetinfo info=lease Or omcong servermodule assetinfo info=lease
Command Level
1
Command Level 2 Command Level
3
Name=
Value Pair 1
Name= Value Pair 2 Description
omcong system or
servermodule
assetinfo info=lease buyout=<amount> Amount of money paid to
purchase a system from a
lessor.
lessor=<lessor> Business entity that is leasing
the system out.
multischedule=true | false Whether cost of leasing the
system is computed by more
than one rate schedule.
ratefactor=<factor> Factor used to calculate the
lease payment.
122 Omcong System Or Servermodule Assetinfo Editing Cost Of Ownership Values