CLI Guide

Table 79. Valid Parameters Of omcong system assetinfo info=acquisition or omcong servermodule assetinfo info=acquisition
Command Level
1
Command Level 2 Command Level 3 Name= Value Pair
1
Name= Value Pair 2 Description
omcong system or
servermodule
assetinfo info=acquisition costcenter=<text> The name or code for
the business entity
that acquired the
system.
expensed=yes | no Whether the system is
charged to a specic
purpose or
department such as
research and
development or sales.
installdate=<mmddyy> Date the system was
put to service.
ponum=<n> Number of the
document that
authorized payment
for the system.
purchasecost=<n> Price the owner paid
for the system.
purchasedate=<mmddyy> Date the owner
purchased the system.
signauth=<text> Name of the person
who approved the
purchase or the
service call on the
system.
waybill=<n> Receipt from the
carrier for the goods
received.
Example command for adding acquisition information
To provide a value for an acquisition parameter, type a command of the form: omcong system assetinfo info=acquisition <name=value pair
2> or omcong servermodule assetinfo info=acquisition <name=value pair 2>. For example, type:
omconfig system assetinfo info=acquisition purchasedate=122101
or
omconfig servermodule assetinfo info=acquisition purchasedate=122101
The following message is displayed:
Asset information set successfully.
You can type more than one omcong system assetinfo or omcong servermodule assetinfo command at the same time, as long as all of
the parameters for name=value pair 2 belong to the same name=value pair 1. For example, to type more than one parameter value for
info=acquisition, use the following example as a syntax guide:
omconfig system assetinfo info=acquisition purchasecost=5000
waybill=123456 installdate=120501 purchasedate=050601 ponum=9999 signauth="John Smith"
expensed=yes costcenter=finance
120
Omcong System Or Servermodule Assetinfo Editing Cost Of Ownership Values