CLI Guide
Event Name Description
event=removableashmediaremov
ed
Sets actions that Server Administrator performs when a removable ash media is removed.
event=removableashmediafail Sets actions that Server Administrator performs when a removable ash media fails.
event=storagesyswarn Sets actions when a storage system detects a warning value.
event=storagesysfail Sets actions when a storage system detects a failure value.
event=storagectrlwarn Sets actions when a storage controller detects a warning value.
event=storagectrlfail Sets actions when a storage controller detects a failure value.
event=pdiskwarn Sets actions when a physical disk detects a warning value.
event=pdiskfail Sets actions when a physical disk detects a failure value.
event=vdiskwarn Sets actions when a virtual disk detects a warning value.
event=vdiskfail Sets actions when a virtual disk detects a failure value.
event=enclosurewarn Sets actions when an enclosure detects a warning value.
event=enclosurefail Sets actions when an enclosure detects a failure value.
event=storagectrlbatterywarn
Sets actions when a storage controller battery detects a warning value.
event=storagectrlbatteryfail
Sets actions when a storage controller battery detects a failure value.
Example Set Alert Action Commands
The following are examples of valid example commands. For each successful command issued, the following message is displayed:
Alert action(s) configured successfully.
Example Current Probe Actions
To disable system console alert if a current probe detects a warning event, type:
omconfig system alertaction event=currentwarn alert=false
or
omconfig servermodule alertaction event=currentwarn alert=false
To enable broadcast messages if a current probe detects a failure event, type:
omconfig system alertaction event=currentfail broadcast=true
or
omconfig servermodule alertaction event=currentfail broadcast=true
Example Fan Probe Actions
To generate alerts when a fan probe detects a failure value, type:
omconfig system alertaction event=fanfail alert=true
or
omconfig servermodule alertaction event=fanfail alert=true
Omcong
Managing Components Using The Instrumentation Service 109