CLI Guide

Omcong System Alertaction Or Omcong Servermodule
Alertaction
You can use the omcong system alertaction or omcong servermodule alertaction command to determine how Server Administrator
responds when a component has a warning or failure event.
Dening alert actions
An alert action is an action that you specify for the system to take when specied conditions are met. Alert actions determine in advance
what actions to take for warning or failure events on intrusion, fans, temperatures, voltages, power supplies, memory, and redundancy.
For example, if a fan probe on the system reads a fan RPM of 300 and your minimum warning threshold value for that fan probe is 600
RPM, then the system generates a fan probe warning. Alert action settings determine how users are notied of this event. You can also
congure alert actions for temperature, voltage, and probe readings that fall within the warning or failure range.
Syntax For Setting Alert Actions
Setting an alert action requires two name=value pairs. The rst name=value pair is the event type. The second name=value pair is the
action to take for this event. For example, in the command:
omconfig system alertaction event=powersupply broadcast=true
or
omconfig servermodule alertaction event=powersupply broadcast=true
The event is a power supply failure and the action is to broadcast a message to all Server Administrator users.
Available alert actions
The following table displays the alert actions for each component that allows you to congure an alert action:
Table 66. Valid Parameters of Alert Actions For Warning and Failure Events
Alert Action Setting Description
alert=true | false
true: Enables the system's console alert. When enabled, the
monitor attached to the system from which you are running Server
Administrator displays a visual alert message.
false: Disables the system's console alert.
broadcast=true | false
true: Enables a message or alert to broadcast to all users who have
an active terminal (or Remote Desktop) session (Windows) or to
operators that have an active shell on the local system (Linux.)
false: Disables alert broadcasts.
clearall=true Clears all actions for this event.
execappath=<string>
Sets the fully qualied path and le name of the application you
want to execute in case of an event for the component described in
this window.
Omcong Managing Components Using The Instrumentation Service 107