Users Guide
Property Denition
Name Displays the name of the controller.
NOTE: For PowerEdge FD332 storage sled, the name is
displayed as:
• Single controller — PERC FD33xS (Integrated RAID
Controller <X> in Front Chassis Slot <Y>, where X
displays the controller number and Y displays the front
chassis slot number.
• Dual controller — PERC FD33xD (Integrated RAID
Controller <X> in Front Chassis Slot <Y>, where X
displays the controller number and Y displays the front
chassis slot number.
NOTE: For PowerEdge MX740c and MX840c having
PERC H745P mapped with MX5016s, the storage
controller name is displayed as PERC H745P MX
(MEZZANINE 1C)
Slot ID Displays the slot to which the controller is attached. For PowerEdge
FD332 storage sled, the name is displayed as: H745P MX and HBA
330 MMZ (MEZZANINE 1C).
NOTE: You can also identify the slot ID by selecting the
System > Main > System Chassis > Slots object and
clicking the Information tab.
State Displays the status of the controller. Possible values are:
• Ready — The controller is functioning normally.
• Degraded — The controller has encountered a failure and is
operating in a degraded state.
• Failed — The controller has encountered a failure and is no
longer functioning.
Firmware Version Displays the version of the rmware that is installed on the
controller.
NOTE: Storage Management displays Not Applicable on
some controllers for which the rmware version cannot be
obtained.
Minimum Required Firmware Version Displays the minimum rmware version that is required by Storage
Management. This property is displayed only if the controller
rmware does not meet the minimum requirement.
Driver Version Displays the version of the driver that is installed on the controller.
NOTE: Storage Management displays Not Applicable on
some controllers for which the driver version cannot be
obtained.
Minimum Required Driver Version Displays the minimum driver version that is required by Storage
Management. This property is displayed only if the controller driver
does not meet the minimum requirement.
Number of Connectors Displays the number of connectors on the controller. Each
connector can be attached to physical disks or an enclosure.
Depending on the controller type, the connector can be either a
SCSI channel or a SAS port.
Controllers 49