Users Guide
Property Denition
Minimum Required Storport Driver Version Displays the minimum storport driver version required by Storage Management.
This property is displayed if the operating system storport driver does not meet
the minimum requirement. This option is applicable only on systems running
Microsoft Windows operating system.
NOTE: To download the latest storport driver, see the Microsoft
Knowledge Base article KB943545 at support.microsoft.com.
Controller Health
The controller Health page displays the status of the controller and the components attached to the controller.
Controller Components
For information on attached components, see:
• RAID Controller Batteries
• Firmware Or Driver Versions
• Connectors
NOTE: If you have connected the enclosure in Redundant path mode, the connectors are represented as Logical
Connector.
• Virtual Disks
Controllers Properties And Tasks
Use the controllers properties and tasks window to view information about the controller and perform controller tasks.
NOTE
: The rmware and drivers listed in the
Server Administrator Release Notes
, see the minimum supported version for these
controllers. Later versions of the rmware and drivers are also supported. For the most recent driver and rmware requirements,
contact your service provider. The controller properties can vary depending on the model of the controller.
Table 9. Controller Properties
Property Denition
ID Displays the ID assigned to the controller by Storage Management.
Storage Management numbers the controllers attached to the
system starting with zero. This number is the same as the controller
ID number reported by the omreport CLI Command. For
information on Command Line Interface, see the Server
Administrator Command Line Interface User’s Guide.
Status These icons represent the severity or health of the storage
component.
For more information, see Storage Component Severity.
• — Normal/OK
• — Warning/Non-critical
• — Critical/Failure/Error
48 Controllers