Users Guide

NOTE: For PERC H330, H730, H730P, H730P MX, H740P, H745P MX and H840 controllers, if any of the drives you
selected is in the spun down state, the following message is displayed: The below listed physical drive(s)
are in the spun down state. Executing this task on these drive(s) takes additional
time, because the drive(s) need to spun up. The message displays the ID(s) of the spun down drive(s).
To Locate Replace Member Disk In Storage Management
1 In the Server Administrator window, under the system tree, expand Storage to display the controller objects.
2 Expand a controller object.
3 Select the Virtual Disks object.
4 Select Replace Member Disk from the Available Tasks drop-down menu.
5 Click Execute.
Virtual Disk Task - Replace Member Disk Step 2 of 2
This page displays the summary of the attributes of the virtual disk in which you replaced the member disk. Use this page to review your
changes before completing the virtual disk replace member task.
To Replace a Member Disk: Step 2 of 2
1 Review your changes. The source Physical Disk table displays details of the source physical disk. The destination Physical Disk table
displays details of the destination physical disk.
2 Click Finish to complete the replace member task.
If you want to change the replace member, click Go Back to Previous Page. To exit without making changes, click Cancel.
Virtual Disks
145