Release Notes

• Due to non-availability of resources, inventory collector may terminate unexpectedly and restart. If this occurs, the folder C:\Temp
\invcol may be left as an artifact. The presence of this folder does not aect the functionality of the inventory collection. The folder
can be deleted if required.
• After installing Server Administrator from the command prompt, typing an omreport or mcong command from the same prompt can
cause an error. Open a new command prompt window and type commands.
• If the command log page in the Server Administrator GUI displays an error message indicating that the XML is malformed, you must
clear the command log from the CLI using the omcong system cmdlog action=clear command
• After a Reset to Defaults operation of the Integrated Remote Access Controller, the rst user conguration, operation fails if it is a
single-user conguration item (such as enabling or disabling a user or changing user name). Always change a combination of two-user
conguration items (such as enabling or disabling a user and changing user name) concurrently during your rst conguration operation.
• While typing the command omreport system version -outc <lename>, ensure that you specify an absolute path name for the output
le; else, the output le is empty. For example,
c:\out.txt.
• Typing omreport system esmlog/alertlog/cmdlog -fmt tbl command on the CLI can result in XML parsing errors if the size of the log
is large. Use the GUI or the omreport system esmlog/alertlog/cmdlog CLI command to view the contents of the log.
• For complex omcong CLI commands that contain multiple set commands in one command line, the CLI may report a success status
for the command even if a part of the command failed. To avoid this issue, run only one command per command line. The current
settings can be conrmed by performing the corresponding omreport command.
• Some complex omcong CLI commands that contain multiple set operations have been modied to avoid the above problem. While
running a CLI command if the message, Error! Illegal combination of parameters is displayed, modify your command into several
simpler commands. Each command should change only one setting.
• When running Server Administrator on a system with a traditional Chinese operating system, the application pages are displayed in
simplied Chinese. To view the Server Administrator pages in English, go to your browser language preference page and change the
language to English.
• Log les saved from Server Administrator are saved in zip format. It is recommended that you open this zip le using WinZip. Windows
Server 2003 or Windows XP embedded Compressed (zipped) Folder utility is not recommended.
• After conguring BIOS settings on certain systems, a second reboot may be required for the Server Administrator to display the
updated BIOS settings properly.
• If you import an invalid root certicate into Server Administrator, using Preferences > General Settings > Web Server > X.509
Certicate, and try to log on to the application after restarting the Web server, a blank page is displayed. To x this issue, restore your
original keystore.db le before importing a valid root certicate. To restore the keystore.db le, use both the basic operating system
commands and the Server Administrator Command Line Instrumentation (CLI).
Perform the following steps from your operating system command line:
a Type: omcong system webserver action=stop
b Locate the keystore.db.bak le. The default path is C:\program les\dell\SysMgt\apache-tomcat\conf.
c Copy keystore.db.bak to keystore.dbkeystore.db.
d Type: omcong system webserver action=start
• A temperature drop below a minimum failure threshold does not cause a system reset even if this alert action is set.
• Clicking the Back and Refresh buttons on the browser may not display the correct page regarding the Server Administrator component
tree, tabs, tab menus, or help, as Server Administrator has been designed with limited functionality to reduce overhead. Full feature
capabilities of the Web browser such as Back, Refresh, and Open in New Window may not be supported.
• Selecting the boot sequence under the BIOS Setup tab does not re-enable boot devices that have been disabled in the System Setup
Program, earlier.
• The links on the Server Administrator home page may not work after repeated random clicking. To resolve this issue, refresh the
browser by pressing <F5> or click the browser Refresh button.
• All unsecured HTTP requests to Server Administrator receive an invalid response. Server Administrator runs only one instance of the
Web server, which is secure. Make all connections through https://<ip address>: <port number>. Any http://<ip address>: <port
number> request for connection with the server receives an invalid response.
• If the web browser used with Server Administrator does not display a page or perform an action, make sure that the browser is in online
mode. To go online, perform the following:
– In Internet Explorer, on the menu bar, click File and clear the Work Oine option. When Work Oine is selected, a check mark is
displayed to the left of the option on the File menu.
• If Internet Explorer prompts you to Work Oine, Connect, or Try Again, always select Connect or Try Again. Do not select Work
Oine.
• In Internet Explorer, on the menu bar, click File and clear the Work Oine option. When Work Oine is selected, a check mark is
displayed to the left of the option on the File menu.
8
Dell EMC OpenManage Release Notes
Version 9.3