Connectivity Guide

Table 429. Controller Boot Mode(continued)
2. User mode: User interaction required for all boot messages (not applicable for uEFI
environments).
3. Continue Boot On Error. User interaction only required for critical messages.
4. Headless Mode Continue On Error. User interaction is not required. Controller boot may
halt on Error.
5. Headless Safe Mode. Controller shall boot to safe mode on critical errors.
Syntax INTEGER
Access read-only
Table 430. Controller High Availability Mode
Name
controllerHighAvailabilityMode
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.85
Description Indicates the fault-tolerant mode of the controller. Possible values:
1. None
2. Fault Tolerant(Active/Passive)
3. Fault Tolerant(Active/Active)
4. Degraded
Syntax INTEGER
Access read-only
NOTE: This attribute is applicable for VRTX CMC only.
Table 431. Controller Peer Controller
Name
controllerPeerController
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.86
Description The peer controller's Fully Qualified Device Descriptor (FQDD) as represented in Storage
Management.
Syntax FQDDString
Access read-only
NOTE: This attribute is applicable for VRTX CMC only.
Physical Disk Table
The object provides information about the Physical disk storage group.
NOTE:
The Storage Details Group is introduced in VRTX CMC from this release. The iDRAC and CMC have the same
Storage attributes with some modification in CMC. The Object ID mentioned example:
1.3.6.1.4.1.674.10892. 5.5 .1.20.130.4.1.1 for the table group are attributes for checking on iDRAC. To check the
corresponding set of attributes for VRTX CMC systems, use the Object ID example:
1.3.6.1.4.1.674.10892. 2.6 .1.20.130.4.1.1.
Table 432. Physical Disk Number
Name
physicalDiskNumber
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.4.1.1
Description Instance number of this physical disk entry.
98 iDRAC MIB