Connectivity Guide

Table 425. Controller T10 PI Capability
Name
controllerT10PICapability
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.80
Description Description Indicates whether the controller supports the T10 PI (Protection Information).
These protection fields are known as DIF (Data Integrity Fields).Possible values:
1. Not one of the following.
2. Capable of supporting T10 PI.
3. Not capable of supporting T10 PI.
Syntax INTEGER
Access read-only
Table 426. Controller RAID10 Uneven Spans Supported
Name
controllerRAID10UnevenSpansSupported
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.81
Description Indicates whether uneven spans for RAID 10 virtual disk is supported on the controller.
Syntax BooleanType
Access read-only
Table 427. Controller Enhanced Auto Import Foreign Config Mode
Name
controllerEnhancedAutoImportForeignConfigMode
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.82
Description Indicates the status of enhanced auto-import of foreign configuration property of the
controller. Possible values:
1. Not one of the following.
2. Not Supported.
3. Disabled.
4. Enabled.
Syntax INTEGER
Access read-only
Table 428. Controller Boot Mode Supported
Name
controllerBootModeSupported
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.83
Description Indicates whether headless boot mode settings are supported on the controller.
Syntax BooleanType
Access read-only
Table 429. Controller Boot Mode
Name
controllerBootMode
Object ID 1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.84
Description Indicates the boot mode of the controller. Possible values:
1. Not applicable for this controller.
iDRAC MIB 97